Nobody wants to deal with mold in their home, and if you do spot signs of growth, you'll need to know how to get rid of mold fast.
Essentially, mold spores are caused by excess moisture and humidity, especially in warm rooms, such as bathrooms and kitchens. If left untreated, these small black spots can spread and do some serious damage to your home, not to mention your health.
But, in our best efforts to keep warm, cozy and energy-efficient for winter, did you know that you could actually be encouraging mold in your home?
Winterizing our homes by sealing windows and cracks or using furnaces, can unintentionally cause excess condensation, leading to mold growth. In addition, there may be issues in and around our property like leaky pipes that can cause moisture build-up if not seen to. In fact, winter is the time when the chances of mold growth in your home is highest.
That’s why it’s so important to prevent mold in your home by inspecting your property, and taking the right measures to ‘mold-proof’ your home in the colder months. So, before you make your home toasty, check out these ways you might be encouraging mold in your home this season, and how to avoid the pitfalls.
If you don’t have one of the best dehumidifiers, you could always try one of these 5 houseplants that will help to prevent mold. Plus, avoid these 5 mistakes you’re making when removing mold.
1. Blocking out ventilation
When preparing our homes for winter, we tend to seal off everything to keep the heat in, and save on our energy bills. From air vents and fans to window insulation, these can all work well to prevent the heat from escaping and keeping cold air in. However, this can also block essential ventilation needed to prevent condensation building up.
This stagnant air can lead to condensation inside your windows, doors or any other surface which could lead to mildew and mold growth. Despite the chill factor, it’s always recommended to open doors and windows a couple of times a week to let in some fresh air and prevent a build-up of moisture.
Bear in mind, if the condensation is an ongoing problem, you might need to look at replacing your windows or seek professional advice.
2. Not using exhaust fans
Another mistake we often make is to not make use of our exhaust fans around the home. These are vital in speeding up the venting process, especially in humid rooms such as the bathroom, or if you’d rather not open a window in colder temperatures.
These exhaust fans are designed to pump out excess moisture and odors from your home, helping to prevent mold growth. They’re often installed around particularly humid areas, such as in the bathroom, kitchen or basement, and can help when you’re lacking the elements.
Ensure the room is well-ventilated to the outdoors once you’ve finished taking a hot bath or shower. Also, if you’re cooking up a storm in the kitchen and releasing a lot of steam from your oven, pots or pans, switch on the exhaust fan immediately. Just avoid leaving them running for longer than needed as these can consume a lot of energy over time.
3. Ignoring a leak
Whether it’s a dripping bathroom faucet or you’ve noticed signs of water damage around your property, leaks should never be ignored. Any plumbing issues could lead to excess moisture and damp build-up in the home, leading to mold growth. You may also notice a bad odor in your home before spotting the leak, especially if the problem pipe is hidden from sight.
Go around your property to inspect for any signs of leaks, drips or water damage. Common areas that experience leaks are bathroom and kitchen sinks, windows or doorways.
If you have a straightforward leak, you can learn how to fix a leaky bathtub faucet without calling in a plumber, or else call in a professional to tackle excessive leaks. When leaks are not dealt with and fixed immediately, this can easily encourage mold, and potential damage to your property such as wood rot. What’s more, if you’ve got a faucet that regularly drips all day, it could waste hundreds of liters of water — costing you in the long run.
4. You don’t clean out your clothes dryer vent
Winter is often the time when we put our clothes dryers to work. But when was the last time you cleaned your dryer vent? Just like most appliances, we need to maintain your dryer, or else it will clog up with lint. Typically, if you have a vented clothes dryer, a vent will run from the back of the appliance to the outside. This carries the moisture that has been evaporated during the cycle and vents it from your home.
Lint build-up can easily clog your vent, and trap excess moisture — creating the perfect conditions for mold growth. What’s more, lint build-up blockages could make it a serious fire hazard. The heat within the vent can cause the lint to combust, so it’s essential that you inspect and clean this area regularly.
Ensure to regularly clean out your lint trap between dryer cycles and regularly deep clean the vent. In fact not cleaning the vent is one of the common clothes dryer mistakes to avoid at all costs.
We recommend cleaning your vent twice a year for guidance — here’s how to clean a dryer vent for step-by-step instructions. Plus, check out one of these best clothes dryers if you're looking to upgrade.
5. Hanging damp laundry indoors without ventilation
If you don’t have a clothes dryer however, we’re left with no choice but to hang our laundry indoors during winter. But as damp clothes dry, this expels moisture into the air that condenses on cold surfaces in the home. This excess moisture can lead to mold growth, especially if there is not enough air circulation.
As cold as it may be outside, make sure there’s adequate ventilation, by cracking a window or door open to allow air through. Or you can move your clothes horse to a well-ventilated room with one of the best dehumidifiers or moisture catchers to eliminate condensation.
6. Not turning on the heat
Turning up the central air is ideal for those colder months, however, experts recommend that not warming up a room could actually encourage mold. “As we know heating can be costly,” says Jimmy Englezos , Senior Brand Manager of Ronseal. “However, one way to avoid mold in the home is to pop the heating on for a short time to keep the rooms from cooling.
An optimal temperature for living rooms is between 68° Fahrenheit and 73° Fahrenheit, and for the bedroom and kitchen, it's 60° Fahrenheit. It is recommended to avoid the temperature falling below 57° Fahrenheit.”
If you want to save on your energy bills, you might want to invest in one of the best space heaters to instantly warm your space.
7. Forgetting to wipe down surfaces
Another thing that we don’t consider is the moisture levels on our walls and surfaces. However, if left unchecked, this could encourage the growth of mold. “The most effective way to stop mold from growing is to control the moisture levels in the home,” advises Englezos. “So wiping away moisture on the windows and walls will help keep those areas dry.” You can use a clean, microfiber cloth to keep all surfaces dry and moisture-free.
More from Tom's Guide
